The Trimble BD1090 is a next-generation, single-antenna OEM GNSS receiver module engineered for high-precision, continuous millimeter-to-centimeter positioning.

Built around Trimble’s Maxwell™ 8 GNSS engine, the BD1090 is designed for integrators and manufacturers building autonomous systems, robotics, UAVs, geospatial platforms, construction guidance, and agricultural machinery. It delivers reliable positioning capabilities with robust signal authentication and defense against hostile RF conditions like jamming, spoofing, and ionospheric interference.

Key Features

• Maxwell™ 8 GNSS Engine: Utilizes Trimble’s latest processing architecture with over 700 channels, delivering simultaneous quad-band, multi-constellation, and multi-frequency tracking.
• Trimble JammerGuard™ Security: Features built-in hardware and algorithmic anti-jamming and multi-layered spoofing defense (including Trimble RTX®-NMA signal authentication) to detect and neutralize RF threats.
• Quad-Core Onboard Processing: Powered by an upgraded quad-core CPU with DDR4 RAM, providing roughly four times the processing power of previous-generation modules to handle complex computations effortlessly.
• All-in-View Tracking: Simultaneously tracks signals across all major operational constellations—GPS, GLONASS, Galileo, BeiDou, QZSS, and NavIC—ensuring maximum signal availability and data integrity.
• Future-Ready LEO Compatibility: Designed to support emerging Low Earth Orbit (LEO) positioning constellations, such as Xona Pulsar, ensuring long-term hardware resilience and alternative signal access.
• Vibration-Resilient MEMS Oscillators: Integrates advanced MEMS-based timing components with up to 10 times lower sensitivity to vibration, ensuring reliable operation on heavy equipment and high-vibration platforms.
• Ionospheric & Multipath Mitigation: Employs Trimble IonoGuard™ technology and Everest Plus™ multipath mitigation to maintain position lock and accuracy during severe ionospheric disturbances or complex urban/environmental reflections.
• Developer-Friendly Integration: Operates on an open-source, publicly supported Linux OS and features the Trimble Interference Toolkit, allowing developers to quickly detect, isolate, and eliminate platform integration noise.

The Trimble BD1092 is a next-generation, dual-antenna OEM GNSS receiver module engineered for continuous centimeter-level positioning and dynamic, precise heading calculations.

Powered by Trimble’s Maxwell™ 8 engine, the BD1092 provides dual-antenna orientation capabilities without requiring an integrated inertial navigation system (INS). Designed for integrators in robotics, autonomous platforms, geospatial surveying, marine, and industrial equipment, it delivers drift-free heading right out of the box, even when stationary along with protection against hostile RF conditions.

Key Features

• Dual-Antenna Precise Heading: Uses two antenna inputs to calculate instantaneous, drift-free orientation and heading measurements without relying on vehicle movement or magnetic sensors.
• Maxwell™ 8 GNSS Engine: Powered by Trimble’s next-gen architecture, offering over 700 tracking channels for simultaneous quad-band, multi-constellation coverage across GPS, GLONASS, Galileo, BeiDou, QZSS, and NavIC.
• Trimble JammerGuard™ Security: Features real-time, multi-layered RF security that automatically detects, isolates, and neutralizes intentional or accidental signal jamming   (pulse, chirp, CW, and SCW interference).
• Multi-Layer Anti-Spoofing Protection: Integrates signal authentication features, including Trimble RTX®-NMA and Galileo OSNMA, to guard against unauthorized GNSS manipulation and spoofing.
• Trimble IonoGuard™ & Multipath Defense: Utilizes IonoGuard™ technology alongside Everest Plus™ to mitigate the impact of severe ionospheric activity, solar storms, and complex environmental multipath signals.
• Vibration-Resilient MEMS Oscillators: Equipped with advanced MEMS-based timing components featuring up to 10 times lower sensitivity to vibration, maintaining high lock stability on heavy machinery.
• Quad-Core CPU Processing: Driven by an upgraded quad-core processor with DDR4 RAM, delivering four times the computational throughput of previous-generation modules to handle complex real-time tasks.
• Future-Ready LEO Compatibility: Built to interface with next-generation Low Earth Orbit (LEO) positioning constellations, such as Xona Pulsar, ensuring alternative signal acquisition and hardware longevity.

The Trimble BD1092i is a flagship OEM GNSS-INS receiver module engineered for high-precision, embedded orientation and positioning applications.

Built on Trimble’s advanced Maxwell™ 8 GNSS engine, the module combines dual-antenna inputs with an integrated Inertial Navigation System (INS) to provide accurate heading, pitch, roll, and centimeter-level positioning. Tailored for autonomous vehicles, robotics, unmanned aerial systems (UAVs), and heavy machinery guidance, the BD1092i delivers high operational uptime and positioning integrity across challenging RF and     signal-denied environments.

Key Features

• Dual-Antenna Precise Heading: Utilizes two antenna inputs to deliver rapid, drift-free heading and orientation calculations instantly, even when the platform or vehicle is completely stationary.
• Integrated High-Accuracy INS: Tightly couples GNSS satellite tracking with onboard MEMS inertial sensors to maintain uninterrupted navigation during temporary signal outages.
• Maxwell™ 8 Engine & ProPoint® Tech: Integrates Trimble’s Maxwell 8 GNSS architecture with the ProPoint® positioning engine, maximizing multi-constellation, quad-band signal processing for robust initializations.
• Trimble JammerGuard™ Security: Features built-in hardware and algorithmic anti-jamming protection to actively monitor, isolate, and neutralize intentional or accidental RF interference.
• Multi-Layer Anti-Spoofing: Incorporates real-time signal authentication—including Trimble RTX®-NMA and Galileo OSNMA—to defend against spoofing and unauthorized GNSS manipulation.
• Trimble IonoGuard™ Technology: Mitigates the disruptive effects of severe ionospheric activity and solar storms, preventing signal degradation and maximizing positioning availability.
• All-in-View Tracking & Correction Support: Tracks signals across all major constellations (GPS, GLONASS, Galileo, BeiDou, QZSS, and NavIC) with support for RTK corrections and Trimble RTX® PPP services.
• Compact OEM Form Factor: Designed as an easily embeddable board featuring flexible communication interfaces (Ethernet, USB, CAN, and RS-232) for integration into space-constrained systems and robotic architectures.

The BD9250 is a dual-frequency L1/L2 or L5 field-switchable GNSS receiver with integrated MSS-Band to support Trimble RTX service.

Key Features:

• Trimble Maxwell 7 Technology
• 336 Channels for multi-constellation GNSS support
• Trimble RTX Support
• L1 + L2 or L5 (Field selectable)
• Compact, lightweight design with industry standard pinouts
• Centimeter-level position accuracy
• Advanced RF Spectrum Monitoring
• Anti-spoofing protection
• Trimble ProPoint GNSS Positioning Engine

The BD9250s is a dual-frequency L1/L2 or L5 field-switchable GNSS receiver with integrated S-Band frequency to support the Indian Regional Navigation Satellite System, NavIC.

Key Features:

• Trimble MaxwellTM 7 Technology
• 3 Trimble RTX
• 336 Channels for multi-constellation GNSS support
• L1 + L2 or L5 (Field selectable)
• Compact, lightweight design with industry standard pinouts
• Centimeter-level position accuracy
• Advanced RF Spectrum Monitoring
• S-Band
• Anti-spoofing protection
• Trimble ProPoint GNSS Positioning Engine

The BD992-INS is a dual-antenna receiver with an integrated inertial navigation system. It is a robust navigation system that supports position and orientation at high update rates.

Key Features:

• Trimble Maxwell 7 Technology
• Onboard high accuracy inertial sensor package integrated with GNSS for precise position and orientation
• 336 Channels for multi-constellation GNSS support
• OmniSTAR/RTX Support
• Compact design for mobile applications
• Flexible RS232, USB and Ethernet interfacing
• Centimeter level position accuracy
• Advanced RF Spectrum Monitoring

The BD992 is a dual-antenna receiver that delivers centimeter accurate positions and precise heading. Heading derived from dual-antenna GNSS measurements helps overcome issues such as difficulty determining where the antenna is positioned relative to the vehicle and object of interest.

Key Features:

• Trimble Maxwell 7 Technology
• Dual-antenna inputs for precise heading calculation
• 336 Channels for multi-constellation GNSS support
• OmniSTAR/RTX Support
• Compact design for mobile applications
• Flexible RS232, USB and Ethernet interfacing
• Centimeter level position accuracy
• Advanced RF Spectrum Monitoring

The BD940-INS integrates the latest in precision inertial sensors on the same module where robust high accuracy positions are produced in all environments. As the number of satellites in the constellations grows, the BD940-INS is ready to take advantage of the additional signals.

Key Features:

• Trimble Maxwell 7 Technology
• Onboard high accuracy inertial sensor package integrated with GNSS for precise position and orientation
• 336 Channels for multi-constellation GNSS support
• OmniSTAR/RTX Support
• EMI shielded module
• Compact design for mobile applications
• Flexible RS232, USB and Ethernet interfacing
• Centimeter level position accuracy
• Advanced RF Spectrum Monitoring

The BD940 is a triple frequency receiver that delivers the quickest and most reliable RTK and RTX initializations for centimeter positioning. The BD940 reduces radiated emissions which speeds compliance certification and time to market. It provides assurance of long-term future-proofing and trouble-free operation.

Key Features:

• Trimble Maxwell 7 Technology
• 336 Channels for multi-constellation GNSS support
• OmniSTAR/RTX Support
• EMI shielded module
• Compact design for mobile applications
• Flexible RS232, USB and Ethernet interfacing
• Centimeter level position accuracy
• Advanced RF Spectrum Monitoring

The BD990 is a triple frequency receiver for all GNSS constellations. The BD990, along with the rest of the BD product family, redefines high-performance positioning and comes with easy to use software which simplifies integration and reduces development time.

Key Features:

• Trimble Maxwell 7 Technology
• 336 Channels for multi-constellation GNSS support
• OmniSTAR/RTX Support
• Compact design for mobile applications
• Flexible RS232, USB and Ethernet interfacing
• Centimeter level position accuracy
• Advanced RF Spectrum Monitoring

The Trimble BD970 GNSS system is a compact multi-constellation receiver designed to deliver centimeter accuracy to a variety of applications. The Trimble BD970 GNSS supports a wide range of satellite signals, including GPS L2C and L5, GLONASS L1/L2 and BeiDou, B1 and B2 signals as well as Galileo. The Trimble BD970 was designed for easy integration and rugged depend ability.

• 220 Channels for Multi-Constellation GNSS Support
• Flexible RS232, USB, Ethernet or CAN Interfacing
• Centimeter level position accuracy
• Compact Form Factor

The Trimble BD982 GNSS system is a single board solution for precise position and heading. The product delivers the latest in GNSS signal support delivering multi-constellation RTK baselines between the two connected antennas and to a remote base station. The BD982 comes with dual chips that support two antennas connected to the board. Independent observations from both antennas are passed to the processor where multi-constellation RTK baselines are computed.

• Dual-antenna inputs for precise heading calculation
• Multi-Constellation GNSS Support
• OmniSTAR VBS/XP/G2/HP support
• Flexible RS232, USB, Ethernet or CAN Interfacing
• Centimeter level position accuracy