Smart City Solutions & Sensors

intelilight-fre-220-external-luminaire-controller

inteliLIGHT® FRE-220 External Luminaire Controller

The external retrofitting version designed for carrying out the remote management of a luminary in street lighting installations with lamps using electronic ballast of up to 500W, with 0-10V (220) or DALI (220D) control interface.

Main Features:

  • Enables individual remote management of streetlight lamps with electronic ballast up to 400W
  • Autonomous operation based on predefined schedules and light level sensor
  • Bandwidth efficient with minimal communication requirements
  • Dedicated high-security memory for encryption keys storage
  • Wide range of electrical parameters monitoring: Wh, VARh, V, W, A, VAR, PF and frequency
  • Advanced data synchronization and notification mechanism
  • Battery operated RTC, protected against unforeseen grid faults
  • External infrared interface for security keys transfer and local configuration
  • Integrated light level sensor
  • Over The Air (OTA) firmware update
  • Designed and optimized for LoRaWAN, Sigfox (long range radio frequency communication technology), LTE-Cat-M1 and NB-IoT networks

 

intelilight-fre-220-m-embedded-luminaire-controller

inteliLIGHT® FRE-220-M Embedded Luminaire Controller

Unprecedented intelligence for any street lighting fixture, right from the production line. Designed to minimize occupied space, the new inteliLIGHT®  FRE-220-M long range RF controller can be embedded into most luminaire designs, allowing any producer to offer smart lighting fixtures.

Main Features: 

  • Smart upgrade for luminaire manufacturers
  • MTBF, average lifetime: 10+ years
  • Enables individual remote management of streetlight lamps with electronic ballast up to 400W
  • Autonomous operation based on predefined schedules and light level sensor
  • Bandwidth efficient with minimal communication requirements
  • Dedicated high-security memory for encryption keys storage
  • Wide range of electrical parameters monitoring: Wh, VARh, V, W, A, VAR, PF and frequency
  • Advanced data synchronization and notification mechanism
  • Battery operated RTC, protected against unforeseen grid faults
  • External infrared interface for security keys transfer and local configuration
  • Integrated light level sensor
  • Over The Air (OTA) firmware update
  • Designed and optimized for LoRaWAN, Sigfox (long range radio frequency communication technology), LTE-Cat-M1 and NB-IoT network
intelilight-fre-220-nema-external-luminaire-controller

inteliLIGHT® FRE-220-NEMA External Luminaire Controller

The NEMA socket (ANSI C136.41) retrofitting version designed for carrying out the remote management of a luminary in street lighting installations with lamps using electronic ballast up to 500W, with 0-10V (220) or DALI (220D) control interface.

Main Features:

  • NEMA socket connected (ANSI C136.41)
  • Enables individual remote management of streetlight lamps with electronic ballast up to 400W
  • Autonomous operation based on predefined schedules and light level sensor
  • Bandwidth efficient with minimal communication requirements
  • Dedicated high-security memory for encryption keys storage
  • Wide range of electrical parameters monitoring: Wh, VARh, V, W, A, VAR, PF and frequency
  • Advanced data synchronization and notification mechanism
  • Battery operated RTC, protected against unforeseen grid faults
  • External infrared interface for security keys transfer and local configuration
  • Integrated light level sensor
  • Over The Air (OTA) firmware update
  • Designed and optimized for LoRaWAN, Sigfox (long range radio frequency communication technology), LTE-Cat-M1 and NB-IoT network
intelilight-frcm-lighting-panel-control-monitoring-unit

inteliLIGHT® FRCM Lighting Panel Control & Monitoring Unit

Installed inside the feeder pillar, it is designed to provide autonomous operation for street lighting installations and to carry out three phase measurements and analysis of electrical parameters in street lighting grids.

Main Features:

  • Autonomous operation based on predefined astrologic calendar and/or external light level sensor (digital INPUT)
  • Remote real-time ON/OFF control
  • Measures parameters in street lighting grids: power factor, active/ reactive/ apparent power, voltage, current, frequency, daily active/ reactive energy consumption
  • Offers configuration options for: current transformer ratio, voltage/power thresholds and daytime/nighttime consumption thresholds
  • Reports any malfunctions and errors to the central server in real-time: under/over power, under/over voltage, phase failure
  • Designed and optimized for LoRaWAN, Sigfox (long range radio frequency communication technology), LTE-Cat-M1 and NB-IoT network
  • Inputs: 2 x Digital input
  • Output: 1 x Dry contact relay output (230V, max 12A)
intelilight-streetlight-control

inteliLIGHT® StreetLight Control

Server or cloud based, with an advanced user management system, inteliLIGHT® StreetLight Control is designed to efficiently manage street lighting projects regardless of their size, up to a virtually unlimited number of lamp controllers in large urban agglomerations and even geographically unconnected metropolis.

Highly interactive and user friendly, inteliLIGHT® StreetLight Control provides powerful management and reporting tools: detailed lamp parameters, real time error reporting and advanced maintenance scheduling tools. In addition, grouping, filtering and updating can be performed through the bulk operations interface, making it easier to manage large number of lamps, groups of lamps, users or scheduled actions.

The software application is capable of managing different communication technologies (LoRaWAN, Sigfox, PLC, LTE-Cat-M1 and NB-IoT), being able to integrate street lighting control hardware solutions from different suppliers. Furthermore, the system can connect and control other open protocol sensors and actuators, thus transforming inteliLIGHT® infrastructure into a SMART CITY platform. Alternatively, it offers APIs to connect to existing integrated city management platforms.

inteliLIGHT® is using the latest data encryption technology to ensure that information transfer and system operation cannot be affected by outside intervention. Safety is of most importance to us and we have researching and continuously upgrading the security of our software solution, eliminating all vulnerabilities.

Main Features:

  • SAAS or one-time license solution
  • Stable, secure and interoperable
  • Automatic street lighting operation (ON/OFF and dimming control)
  • Advanced scheduling based on astrological calendar or light/motion sensors
  • Predefined exceptions to the lighting schedule and manual override
  • Lamp and grid monitoring, real-time alerts, malfunctions management and triggered commands
  • Unlimited number of lamp layers and lamp grouping possibilities, advanced filtering and bulk updating actions
  • Smartphone application support for installation and commissioning
  • Flexible map visualization, public or private map provider integration: ESRI GIS, Google maps, Open Streetmaps, etc’
  • Advanced user management: privilege, area allocation and system management (including independent sub-systems)
  • Advanced data analytics, reporting tools and performance graphs, featuring detailed filtering capabilities (lamp runtime reports, energy savings reports, luminary status reports, etc.)
  • Vendor agnostic, compatible with different lamps and lamp controllers
  • API, available for open data integrations
  • Multi-language interface
uradmonitor-model-city-fixed-environmental-monitoring-station-for-smart-cities

uRADMonitor Model INDUSTRIAL – Fixed Environmental Monitoring Station WITH CUSTOMIZABLE MONITORED PARAMETERS

uRADMonitor INDUSTRIAL is an automated, fixed monitoring station that tracks a total of 6 important air quality parameters. It is compliant to international requirements on determining the Air Quality Index. The data is exported to the uRADMonitor network and can be accessed in real time using the cloud API interface or directly via the local network. Automated monitoring provides more options over using handheld units occasionally. Mapping data trends and being able to react beforehand as a result becomes possible thanks to continuous surveillance and a permanent data flux. Higher detection capability for small variations is obtained and can trigger automated alarms if predefined thresholds are reached, improving reaction time while lowering costs.

The unit comes in a rugged aluminum enclosure with wall mounting support. It supports 2 connectivity options – WiFi and LoRaWAN. Its versatility is combined with a convenient cloud based data access with an API interface to access the measurements directly from the uRADMonitor cloud.

Main Features:

  • Compliant to US, EU, UK requirements on air quality index determination for Smart Cities
  • Four slots for electrochemical sensors, allowing custom gas detection
  • Direct and Cloud data access via API
  • Includes built-in fan for active air flow across the sensing elements
  • Sensors:
    • Internal Temperature:  -40⁰C – +85⁰C
    • PM2.5 (Quality laser scattering sensor – Winsen ZH03A): 0 μg/m³ – 1000 μg/m³
    • PM10 (Quality laser scattering sensor – Winsen ZH03A): 0 μg/m³ – 1000 μg/m³
    • 4 slots for electromechanical sensors with the following default sensors:
      • Ozone                      (Winsen ZE03-O₃):         0 ppm – 20 ppm
      • Carbon Monoxide  (Winsen ZE03-CO):       0 ppm – 1000 ppm
      • Sulphur Dioxide     (Winsen ZE03-SO₂):       0 ppm – 20 ppm
      • Nitrogen Dioxide    (Winsen ZE03-NO₂):      0 ppm – 20 ppm
    • The 4 available slots are interchangeable and may include any of the following sensors:
      • CO        Carbon Monoxide         0 – 1000ppm
      • O2         Oxigen                            0 – 25%VOL
      • NH3       Ammonia Gas               0 – 100ppm
      • H2S       Hydrogen Sulfide          0 – 100ppm
      • NO2       Nitrogen Dioxide          0 – 20ppm
      • HF          Hydrogen Fluoride       0 – 10ppm
      • SO2        Sulfur Dioxide               0 – 20ppm
      • CL2        Chlorine Gas                  0 – 10ppm
      • O3          Ozone                             0 – 20ppm
      • C2H4      Ethylene                         0 – 100ppm
      • CH2O     Formaldehyde               0 – 10ppm
      • ETO        Ethylene Oxide              0 – 20ppm
      • H2           Hydrogen Gas               0 – 1000ppm
      • HCL         Hydrogen Chloride      0 – 20ppm
  • Connectivity: WiFi IEEE 802.11b/g/n or LoRaWAN
  • Power Supply: 9V / Solar
  • Enclosure: IP30, rugged aluminum with wall mounting support
  • Dimensions: 150mm x 60mm x 30mm
  • Weight: 210g
A3models1

uRADMonitor Model A3 – Fixed Environmental Monitoring Station WITH 9 MONITORED PARAMETERS

uRADMonitor A3 is an advanced,  automated, fixed monitoring station that tracks a total of 9 important air quality parameters. It includes sensors for Gamma radiation, formaldehyde, CO2, VOC Air quality +temperature, barometric pressure, air humidity, noise level, and a laser scattering sensor for PM2.5 particulate matter. 

It comes in a rugged aluminum enclosure with wall mounting support. The data is exported to the uRADMonitor network and can be accessed in real time using the cloud API interface or directly via the local network.

The A3 comes in 4 variants, with the same sensors but offering different connectivity options for maximum flexibility: Ethernet, WiFi, GSM and LoRaWAN.

Main Features:

  • Fixed environmental monitoring station
  • Direct and Cloud data access via API
  • Includes built-in fan for active air flow across the sensing elements
  • Sensors:
    • Internal Temperature  (Bosch BME680):     -40⁰C – +85⁰C
    • Pressure                 (Bosch BME680):      300hPa – 1100hPa
    • Humidity                 (Bosch BME680):      0% RH – 100% RH
    • VOC                         (Bosch BME680):      0 – 100 mg/m³ reducers / 10 mg/m³ oxidizers
    • PM2.5                       (Winsen ZH03A):       0 μg/m³ – 1000 μg/m³
    • Formaldehyde CH₂O (Winsen ZE08):       0 ppm – 5 ppm
    • Carbon Dyoxide      (Winsen MH-Z19B):   400 ppm – 5000 ppm
    • γ,x-rays ionizing radiation (SI29BG):         0.01 μSv/h – 9999.99 μSv/h
    • Noise level (MAX4466 electret mic):         30dBA –130dBA
  • Connectivity: Ethernet, WiFi IEEE 802.11b/g/n, GSM/GPRS or LoRaWAN
  • Alarm and notifications functions using built-in speaker or cloud application
  • Power Supply: 9V / 1W
  • Enclosure: Rugged aluminum with wall mounting
  • Dimensions: 110mm x 65mm x 25mm
  • Included: power adapter, Ethernet cable, instructions

uradmonitor-model-d-portable-environmental-monitoring-with-display

uRADMonitor Model D – Portable Environmental Monitoring with display

A compact portable environmental dosimeter, capable of measuring Alpha, Beta and Gamma radiation but also air quality as PM2.5 and Volatile organic compounds. It is a modern design, featuring a large color LCD screen with touchscreen, a GPS receiver to tag all measurements and a SD Card slot. It comes with WiFi connectivity to send all data online.

 

Main Features:

  • Automated radiation monitoring with real time alerts
  • Portable or mounted
  • Sensors:
    • Temperature (Bosch BME680):          -40⁰C – +85⁰C
    • Pressure         (Bosch BME680):           300hPa – 1100hPa
    • Humidity        (Bosch BME680):            0% RH – 100% RH
    • VOC                 (Bosch BME680):            0 mg/m³ – 100 mg/m³ reducers/ 10 mg/m³ oxidizers
    • PM2.5            (Sharp GP2Y1010AU0F):  0 μg/m³ – 800 μg/m³
    • α,β,γ,x-rays   (LND LND712):                 0.005 μSv/h – 5000.00 μSv/h
  • GPS included for matching readings to locations
  • LCD: 2.4”, touchscreen resistive
  • SD Card: MicroSD SDHC, for backup and offline readings
  • Connectivity: WiFi IEEE 802.11b/g/n, Micro USB connector
  • Alarm and notifications functions using built-in speaker
  • Power Supply: Internal Battery, Lithium Ion 1500mAh, USB charging
  • Enclosure: IP30, rugged aluminum
  • Dimensions: 110mm x 65mm x 25mm
  • Weight: 180g
  • Included: power adapter, micro USB cable, 8GB Kingston SD Card, instructions
uradmonitor-model-a-radiation-monitoring

uRADMonitor Model A – Radiation Monitoring

A high quality, automated radiation dosimeter, in a rugged rainproof aluminum enclosure. It runs on low power and provides long term continuous measurements. Measurements are transmitted automatically to the Internet using an Ethernet connection to your internet Router. They can be accessed on the uRADMonitor portal or in your local network directly.

Main Features:

  • Automated radiation monitoring with real time alerts
  • Sensors:
    • Temperature (Dallas DS18B20): -55⁰C – +125⁰C
    • Gamma & X-Ray ionizing radiation (SBM20 Geiger Tube  – Military Grade):
       0.01μSv/h – 9999.99μSv/h
  • Connectivity: Ethernet
  • Power Supply: 5V
  • Dimensions: 110mm x 80mm x 24mm
  • Weight: 180g
  • Enclosure: IP63, wall mounting support
  • Included: power adapter, power cable, Ethernet cable, instructions

 

URADMONITOR-MODEL-KIT1

uRADMonitor Model Kit1

Intended as open source for those who want to build their own dosimeter with their own tools, this is also available pre-assembled. It measures Gamma radiation and with the integrated Ethernet connectivity will send all measurements automatically via the Internet. Add a battery and it can also be used as a portable dosimeter, showing all measurements on the LCD. 

Main Features:

  • Open source / DIY Portable or fixed automated monitoring station
  • Real time alerts using internal speaker or cloud application
  • LCD screen, dims automatically after a certain time to save energy
  • Sensors:
    • Gamma & X-Ray ionizing radiation (SBM20 Geiger Tube  – Military Grade):
      0.01μSv/h – 9999.99μSv/h
    • Can add any other sensors using extension ports
  • Connectivity: Ethernet
  • Power Supply: external 5V or battery 3V (2xAA)
  • Dimensions: 110mm x 60mm x 20mm
  • Weight: 100g
  • Included: power adapter, power cable, Ethernet cable, instructions
Manhole

WSMS-125X321IS – Manhole Cover Open Detector

The Manhole Cover Open Detector is designed to detect if the manhole cover is being tampered or tilted up. It protects against theft of the metal cover and/or the valuable assets down below (e.g. fiber cables, communication equipment, etc’).

It communicates with the IoT AP/Gateway using a LoRaWAN protocol standard for long range wide area (LPWAN) deployments.

The Manhole Cover Open Detector integrates a 3-axis G-sensor and a temperature sensor. The detector reports battery level together with the other sensors data. It also sends a periodical keep-alive update messages.

Main Features:

  • Rugged enclosure – IP68
  • Tilt alert
  • Low battery alert
  • Tamper alert
  • LoRaWAN – long range, low  power, high sensitivity data link
  • Power Supply – Internal battery, 2.2-2.3V
  • Operating Temperature – -40ºC ~ 70ºC
  • Dimensions / Weight – 142mm x 113mm x 42.5mm / 318g
assets15

WSMS-116X321IS – General Purpose asset Tracker

General purpose asset tracker designed for GPS tracking on various assets: bicycles, pets, kids, seniors, bags, etc’. It communicates with the IoT AP/Gateway using a LoRaWAN protocol standard for long range wide area (LPWAN) deployments. The tracker is equipped with GPS, 3-axis accelerometer and a temperature sensor. It also includes BLE for pairing with the mobile application for user configuration usages.

The Asset Tracker is accompanied with an Android/iOS mobile application. The application displays real-time data on the tracker location and condition, it also enables the setting of a perimeter (geo-fencing) that will trigger an alert each time the tracker is outside of the designated area.  

Main Features:

  • Sensors – GPS, 3-axis accelerometer, temperature sensor
    • Location, motion, temperature indications
  • Battery status and Low battery alert
  • Geo-fencing notifications
  • Temperature alert
  • Locations history
  • Pairs through BLE with mobile phone
  • Water proof (IP67)
  • LoRaWAN – long range, low  power, high sensitivity data link
  • Power Supply – Internal battery, 5V/1A USB charger (Pogo pin)
  • Operating Temperature – -10ºC ~ 50ºC
  • Dimensions/Weight – 62.5mm x 24mm x 11.5mm / 14g

 

WSMS-122X321IS

WSMS-122X321IS – Vehicle Tracker

The Vehicle Tracker is designed for tracking vehicles and for theft prevention. It communicates with the IoT AP/Gateway using a LoRaWAN protocol standard for long range wide area (LPWAN) deployments.

The tracker is equipped with GPS, 3-axis accelerometer and temperature sensor.

The Vehicle Tracker sends real time location and alerts to the data center. A perimeter (geo-fencing) can be set for triggering an alert each time the tracker is outside of the designated area.  

Various alerts can be generated for different scenarios, such as: low battery, battery disconnection, state of the vehicle (stationary / in motion), etc’

Main Features:

  • Sensors – GPS, 3 axis accelerometer, temperature sensor
    • Location, motion, temperature indications
  • Geo-fencing notifications (by data center)
  • Displacement detection alert
  • Battery disconnection alert
  • Low battery alert
  • Long range data link with GPS tracking
  • Water proof (IP65)
  • Power Supply – 12-36V (depending on vehicle battery)
  • Operating Temperature – -10ºC ~ 50ºC
  • Dimensions / Weight  – 75mm x 40mm x 15mm / 43g
Cattle-RFID-and-Tracker-Tag-

WSMS-127IS – Cattle RFID and Tracker Tag

The Cattle Tracker Tag contains RFID for cattle identification and LoRa transmission to position that particular cattle based on RSSI data from receiving gateways. Internal battery can sustain continuous LoRa transmission every 15 minutes for 1 day without charging. Each tag is equipped with solar panel to keep charging and replenish the battery for continuous operation. Every 15 minutes, the tag will report battery status to a LoRa network. Based on the RSSI data from the group of gateways that receive the same message, the LoRa server can position the tag either by Gemtek’s patented Smart Positioning using RSSI fingerprint or by trilateration.

No GNSS/GPS device is involved in order to preserve energy and to prolong battery time.

The Cattle Tracker helps farmers to monitor the health of each cattle by indicating its movement during the day.

Main Features:

  • Based on RSSI data from multiple gateways, the server calculates the cattle’s position
  • Includes solar panel to provide continuous charging for internal battery
  • Provides periodic battery status messages
  • Includes RFID for cattle identification
  • Water proof (IP67)
  • Power Supply – 1.8-3.6V with integrated solar panel
  • Operating Temperature – -10ºC ~ 50ºC
  • Dimensions / Weight – 149mm x 63mm x 12mm / 42g

 

TA120---Noise-Monitoring

TA120 – Noise Monitoring Station

The TA120 can be used for noise sensing in Smart Cities, permanent monitoring of road and port infrastructures, industrial activities, work control, monitoring of noise in concerts, festivals, noise maps generation, reinforcement of quite areas or quite hours, etc.

The TA120 sensor combines the precision of a Class 1 sound level meter, maximum protection of an outdoor kit and full connectivity with CESVA ‘NoisePlatform’ and open source platforms.

It is very easy to install on street lights, marquees, billboards, shelters, kiosks and advertising posts and requires minimum annual maintenance.

The TA120 is powered through mains, POE, 12 VDC voltage or through the urban lightning network with battery backup. The BA120 optional battery guarantees the sufficient duration and charging time to complete annual cycles.

Main Features:

  • Continuous measurement (24 / 7) with class 1 accuracy according to IEC 61672-1
  • Measurement range 35-120 dBm; resolution 0.1 dB
  • Protection against external agents with an outdoor kit: wind, rain, snow, birds and insects
  • IP65 protection against dust and water
  • Compatible with ‘NoisePlatform’ and various open source platform for sensors connectivity
  • Light weighted, small sized and easy to integrate into the urban furniture 
  • Powered by mains, POE (Power over Ethernet), 12 VDC (Solar panels, external batteries)
  • Communication by Ethernet (RJ45), loop 4-20mA*, Wi-Fi*, 3G modem*  (*Optional) 
  • Remote configuration and Firmware Over-The-Air (FOTA)
  • Dimensions: 395mm x 120mm x 91mm
  • Weight: 960g (1150g w/ battery)
  • Applications:
    • Smart Cities sensing
    • Noise surveillance networks (permanent monitoring):
      • Road and port infrastructures
      • Industrial activities
      • Separate waste collection routes
      • Control of Works
    • Noise monitoring:
      • Concerts, festivals, major events and exhibitions
      • Sports events and racetracks
      • Quiet areas (acoustically protected)
      • Quite hours
    • Generating noise maps and displaying in real time noise levels
  • Add-ons:
    • WF120 – WiFi module
    • MR120 – 3G/GPRS module
    • CL120 – Analogue output for 4-20mA current loop
    • BA120 – Internal lithium battery for 24h cycles
    • PS120 – Solar panel kit (BA120 battery required)
    • TS120 – Mounting kit
np

NoisePlatform – On-line noise monitoring platform

NoisePlatform is an on-line platform that displays and dynamically analyses, in real time, the noise measured by a mixed network of sensors and terminals that can monitor the entire area affected by noise-generating activities. 

Main Features:

  • A step forward in noise monitoring to fight sound pollution by covering a broader area and time period with multiple sensors (TA120)
  • Real-time information display and dynamically analyses noise levels  for immediate decision making and action taking
  • Generates noise maps and compares noise level between different periods of time and sensors
  • Provides day/evening/night min values
  • Controls and enforces fulfilment of operation time (e.g. construction, loud music, etc’)
  • In industrial environments, can detect machine failures before occurrence
  • Generates alarm and alerts (e.g. emails) before noise threshold exceeds
  • Economically sustainable. NoisePlatform offers low sensor, maintenance and platform usage costs
  • High-precision data measurement, utterly reliable transmission of information and totally secure data storage
  • NoisePlatform delivers access, display, analysis, downloads and reports 100%-on-line without the need for any software installation (i.e. cloud based), thus guaranteeing permanent availability
  • Applications:  Cities (Smart Cities), Environmental, Building/Construction/Demolition, Industrial Noise, Leisure activities (e.g. concerts, parties), etc.

Coming Soon…

SINGLE-SENSOR

SINGLE SENSOR

Single Sensor is an enterprise class device monitoring fill-level of various types of containers. It uses single ultrasonic beam that can measure up to the depth of 200cm. Single sensor is recommended for all bin types starting from family house bin’s size (240L). It incorporates accelerometer for tilt recognition. It also informs you about the container’s temperature that can be used as a fire alarm.

The sensor may operate fully independent in LoRaWAN, Sigfox or in a RF-MESH mode as a slave to a neighbor Double Sensor or to Solar powered External Master (both communicating by GSM).

The sensor is powered by replaceable batteries which frequently inform the operator about their capacity. The housing is highly durable and robust – made of recyclable polyamide with optical fibers.

Sensors are quickly configurable via Cloud-based WebAdmin application and the received data is presented via Dashboards which include maps, tables, graphs, data exports and fully automated planning of the collection routes.  The gathered data from sensors is presented also via the Advanced Analytics tool which provides complex analytical views needed for decision making in terms of planning and managing the capacity of the containers and the collection cycles’ rate.

 

Main Features:

  • Sensor Type: one ultrasonic beam (30⁰ angle)
  • Measurement Distance: 15 to 170/255 depending on how reflective is the content (e.g glass is highly reflective)
  • Includes temperature sensor and accelerometer (for overturn/tilt detection)
  • Overturn alert
  • Operating Temperature:  -30⁰C – +70⁰C
  • Readings / Transmisions: 6 times a day
  • Connectivity: LoRaWAN or Sigfox or RF- MESH (GSM-slave)
  • Power Supply: Internal replaceable batteries, 2 x 3.6V 2600mAh
  • Enclosure: IP67, Recyclable, Robust, Water and Shock resistance
  • Dimensions: 50mm x 120mm x 54mm
  • Weight: 215g w/ batteries, 165g w/o batteries
QUATRO SENSOR

QUATRO SENSOR

Quatro Sensor is an enterprise class device monitoring fill-level of various types of containers. It uses four ultrasonic beams that can measure up to the depth of 400cm. Quatro sensor is recommended for high capacity bin types starting at 2 square meters. It incorporates accelerometer for tilt recognition and GPS module for position measurement and time synchronization. It also informs you about the container’s temperature.

The sensor may operate fully independent in LoRaWAN, Sigfox, NB-IoT, Cellular networks or in a BLE-MESH mode as a master or slave with neighbor sensors.

The sensor is powered by replaceable batteries which frequently inform the operator about their capacity. The housing is highly durable and robust – made of recyclable polyamide with optical fibers. The sensor is configurable via all networks or in place via Bluetooth Android application.

Sensors are quickly configurable via Cloud-based WebAdmin application and the received data is presented via Dashboards which include maps, tables, graphs, data exports and fully automated planning of the collection routes.  The gathered data from sensors is presented also via the Advanced Analytics tool which provides complex analytical views needed for decision making in terms of planning and managing the capacity of the containers and the collection cycles’ rate.

 

Main Features:

  • Sensor Type: Four ultrasonic beam (30⁰ angle)
  • Measurement Distance: 15 – 400cm
  • Includes GPS, temperature sensor and accelerometer (for overturn/tilt detection)
  • Fire alarm and overturn alert
  • Operational Temperature:  -30⁰C – +70⁰C
  • Readings / Transmisions: 24 times a day
  • Connectivity: LoRaWAN, Sigfox, NB-IoT, GSM or BLE-MESH
  • Power Supply: Internal replaceable batteries, 3.7V / 14.5Ah; 2 for NB-IoT or GSM / 1 for LoRaWAN or Sigfox
  • Enclosure: IP67, Recyclable, Robust, Water and Shock resistance
  • Dimensions: 63mm x 200mm x 87mm
  • Weight: 750g w/ batteries; 550g w/o batteries
WASTE MANAGEMENT TOOLS SUITE

WASTE MANAGEMENT TOOLS SUITE

The waste management tools suite is composed of several tools each provides the user with different views and features that helps to monitor, analyze and plan the operation based on real-time sensors’ data.

Included tools are:

  • Smart Waste Management System – WMS:
    A powerful enterprise grade cloud based management and provisioning platform enabling end customers to monitor, manage and configure their daily business and also enables the partners to manage and configure all the data for their customers. It includes dashboards with visual data, bins configuration module, routes overview and fleet management module, reports module and more.
    The application provides with planning of optimal collection routes and semi-automated navigation. It also includes predictions, exports, visualization, graphics, full container management and feedback from citizens. The application is part of the solution and is available for customer’s managers as a web-based application, as well as an Android tablet version.
  • Advanced Analytics Tool:
    Represents valuable analytics and reporting toolset which allows customers to “Understand their waste”. Customers learn via Advance Analytics all statistics concerning types of monitored bins, the overall monitored capacity as well as the distribution of the bins in specific locations of the city, business or industrial park.
    Via Advance Analytics the customers are able to analyze dynamics of the waste in every monitored bin (how much and how fast waste is generated), can pinpoint bins with inappropriate capacity or collection frequency, can recognize places with appropriate or low quality of service for citizens or businesses, can understand the “hot” days where most of the specific waste is generated and most importantly customers can recognize efficiency of the bin capacity usage to optimize their collection routes.
  • Route Optimization Intelligence (ROI):
    Delivers valuable toolset for automated management of the waste collection routes. ROI comprises from Fleet management module which allows the customer to define his fleet of waste collection vehicles (e.g. size, weight, capacity), vehicles’ depots and discharges of the waste. ROI allows the operator to manage his routes by one click and effectively utilize collection vehicles and plan the most efficient route. The tool considers size and weight of your vehicle to avoid the situation when your car is sent to the place where it overreaches the size or weight limits of bridges/gates and other weight and size sensitive places. The intelligence works also with costs and enables you to have an actual overview of the costs per each planned activity.
  • Citizen App:
    Citizens have access to data from Sensoneo Sensors via a free mobile app by Sensoneo – Citizen App. The app informs about waste levels in all monitored bins and enables users to find the nearest available empty bin for specific waste types including directions to the bins. It also enables citizens to instantly report on problems with the bins or their surrounding including pictures. The app is available worldwide on Android and IOS platforms.