IMU & NAV

Inertial Measurement Sensors are used in a wide variety of applications. Those include Inertial Measurement Units (IMU) and Navigation Systems (NAV).

We offer a broad range of high quality and reliable IMU and Navigation systems of our leading global partners.

Geodetics is an expert in Navigation systems and advanced sensing systems. Geodetics precise Positioning, Navigation and Timing (PNT) solutions are designed to address a wide range of requirements for Air, Sea and Land, including high speed pointing/attitude and relative position/angle applications.

Aceinna is a spin-off of Memsic Inc. a world leader in MEMS sensors technology. Aceinna’s inertial systems provide end-users and systems integrators with fully-qualified MEMS-based solutions for measurement of static and dynamic motion in a wide variety of challenging environments, including; avionics, remotely operated vehicles, agricultural and construction vehicles and automotive test.

 

 

Quotation Request

memsic
MEMSIC IMU280ZA - INERTIAL MEASUREMENT SYSTEM

ACEINNA IMU280ZA – INERTIAL MEASUREMENT SYSTEM

The ACEINNA IMU280ZA is a low cost miniature fully- calibrated inertial measurement system designed for demanding embedded applications that require a complete dynamic measurement solution in a robust low-profile package. The IMU280ZA provides a standard SPI bus for cost-effective board-to-board communications.

 

Key Features:

  • Complete 6DOF Inertial System
  • Optional 3-Axis Magnetometer
  • Standard and High Range Options
  • SPI (or UART) Interface
  • Update Rate, 1Hz to 200Hz
  • 1KHz Clock Sync Input
  • Miniature Package, 24 x 37 x 9.5 mm
  • Lightweight < 17 g
  • Low Power Consumption < 250 mW
  • Wide Temp Range, -40C to +85C
  • High Reliability, MTBF > 50k hours

 

ins380sa

ACEINNA INS380SA – INERTIAL NAVIGATION SYSTEM

The ACEINNA INS380SA is a standalone fully-integrated Inertial Navigation System offering a complete dynamic measurement solution in a miniature environmentally protected package. The INS380SA combines a highly reliable MEMS 9 DOF sensor suit (3 DOF accelerometer, 3 DOF gyro, 3 DOF magnetometer) with a 48-channel high-sensitivity SBAS GPS receiver in a miniature fully-calibrated standalone module that offers consistent performance in a wide variety of dynamic control and navigation applications. The INS380SA offers a highly-effective solution for cost-sensitive demanding applications.

 

Key Features:

  • Complete Inertial Navigation System
  • 9 DOF Sensor Suit (Accel / Gyro / Mag)
  • Built-in 48 Channel GPS Receiver
  • RS-232 or RS-422 Interface
  • Update Rate, 1Hz to 100Hz
  • Miniature Package, 41 x 48 x 22mm
  • Wide Input Voltage Range, 9-32VDC
  • Low Power Consumption < 350 mW
  • Wide Temp Range, -40C to +85C
  • High Reliability, MTBF > 50k hours
  • Environmentally Protected Enclosure
350

ACEINNA IMU350 – INERTIAL MEASUREMENT UNIT

The ACEINNA IMU350 is a robust entry-level Inertial Measurement Unit that utilizes MEMS based high-stability inertial sensors and precision factory calibration to provide unmatched value in terms of both price and performance. The IMU350 is a next generation replacement for the widely accepted IMU320 used in dynamic control and land navigation systems with over 1500 systems currently in service.

 

Key Features:

  • Angular Rate and Accel Data at 100Hz
  • High Reliability MEMS Sensors
  • Low Drift, Low Noise
  • Wide Temp Range (-40°C to +70°C)
  • Wide Input Power Range (9-30V)
  • Low Profile <1.5”
  • Lightweight <0.5lbs
440

ACEINNA IMU440 – MEMS INERTIAL MEASUREMENT UNIT

The ACEINNA IMU440 is a high-reliability low power strapdown inertial system providing accurate measurement of angular rate and linear acceleration in dynamic environments, with output data also available in delta theta and delta velocity format. The IMU440 is offered in standard and high range sensor configurations to allow the best match for the user’s application.

 

Key Features:

  • 3-Axis Angular Rate and 3-Axis Linear Acceleration Outputs
  • Delta Theta and Delta Velocity Outputs
  • Bias In-Run Stability < 10 deg/hr
  • Output Data Rate > 100 Hz
  • High-Range Sensor Options (400 deg/sec and 10g)
  • Low Power < 3W
  • High Reliability, MTBF > 25,000 hours
  • Analog Output Option
  • Rugged Sealed Enclosure

 

380

ACEINNA IMU380ZA – INERTIAL MEASUREMENT SYSTEM

The ACEINNA IMU380ZA is a miniature fully- calibrated inertial measurement system designed for demanding embedded applications that require a complete dynamic measurement solution in a robust low-profile package. The IMU380ZA provides a standard SPI bus for cost-effective board-to-board communications.

Key Features:

  • Complete 6DOF Inertial System
  • Optional 3-Axis Magnetometer
  • Standard and High Range Options
  • SPI (or UART) Interface
  • Update Rate, 1Hz to 200Hz
  • 1KHz Clock Sync Input
  • Miniature Package, 24 x 37 x 9.5 mm
  • Lightweight < 17 g
  • Low Power Consumption < 250 mW
  • Wide Temp Range, -40C to +85C
  • High Reliability, MTBF > 50k hours

 

nav440

ACEINNA NAV440 – GPS-AIDED MEMS INERTIAL SYSTEM

The ACEINNA NAV440 is a fully-integrated GPS-aided attitude & heading reference system and GPS navigation solution. The NAV440 provides full inertial data (angles, rates, accels) and GPS position, along with inertially derived velocity that provides significant improvement in stability and latency compared with stand-alone GPS velocity measurements.

 

Key Features:

  • Complete GPS-Aided AHRS Solution
  • Accuracy < 0.2 deg
  • Output Data Rate > 100Hz
  • High-Range Sensor Options (400 deg/sec and 10g)
  • WAAS and EGNOS Enabled GPS
  • Low Power < 4W
  • High Reliability, MTBF > 25,000 hours
  • Analog Output Option
  • Rugged Sealed Enclosure
  • DO-160D Environments