GPS Ground &Vehicular Antennas - L1/L2

AeroAntenna, Trimble and Protempis design and produce well-filtered ground and vehicle antennas which are able to withstand high levels of interference.

These antennas are available with multiple configuration options and are therefore compatible with any GPS receiver on the market.

 

Quotation Request

AeroAntenna AT2775-12

L1/L2 GPS w/SMAF side Connector, Passive

AeroAntenna AT2775-42

The AT2775-42 is a high performance L1/L2 band GPS antenna that mounts on a 1-14 UNS-2B threaded pipe. Its all weather housing protects it from the elements under extreme conditions.

AeroAntenna AT2775-43

L1/L2 Choke Ring GPS Antenna.

AeroAntenna AT2775-54

The AT2775-54 is a high performance GPS antenna. It’s ruggedized all weather housing protects it from the elements under the most extreme conditions. It has exceptional capability to pick up satellites low on the horizon which is beneficial in rough sea conditions.

AeroAntenna AT2775-138

L1/L2 GPS ANTENNA VHF MAN-PACK WHIP

AeroAntenna AT2775-103

L1/L2 low profile antenna with side connector

AeroAntenna AT2775-264

L1/L2 Gooseneck Antenna

AeroAntenna AT2775-278

At only 1.35” x 1.35”and less than 40 grams the AT2775-278 is a very small lightweight high performance GPS L1 and L2 band antenna with a six inch RG316 coax terminated with a MCX male right angle connector. Common applications are portable handheld devices and Small Unmanned Aerial Vehicles (SUAV).

AeroAntenna AT2775-304

The AT2775-304 is GPS L1, L2 band antenna and only 2.18” by 2.18” with a low profile that can be mounted to equipment or vehicles via four mounting screws and has a side exiting SMAF connector. It is available in Desert Tan or Olive Green. The black color is offer as AT2775-305.

AeroAntenna AT2775-305

The AT2775-305 IS a light weight, DAGR Antenna for tracking L1 & L2 signals, Quick magnetic mount with SMA Female Connector. Magnet base can be removed and hard mount with same connector.

AeroAntenna AT2775-382

The AT2775-382 is a high performance multi-frequency, multi-constellation L-Band and GPS antenna. It is NGS calibrated and can be used for RTK networks, scientific, and machine control applications. It’s ruggedized all weather housing protects it from the elements under the most extreme conditions. It has exceptional capability to pick up satellites low on the horizon which is beneficial in rough sea conditions. This antenna is used for the harshest environments like marine/offshore positioning or survey. Typical applications include: Geodetic Antenna for Real-Time Kinematic (RTK) applications. Precision Rover Antenna for Land Survey applications

AeroAntenna AT2775-383

The AT2775-383 is a high performance L1/L2 band GPS antenna. Its ruggedized all weather housing protects it from the elements under the most extreme conditions. It has exceptional capability to pick up satellites low on the horizon which is beneficial in rough sea conditions.

AeroAntenna AT2775-497

The AT2775-497 is a light weight Antenna for tracking L1 & L2 signals, fix mount with MMCX Male right angle connector.

AeroAntenna AT2775-557

The AT2775-557 is L1/L2 Low Profile antenna

AeroAntenna AT2775-1915

The AT2775-1915 is a choke ring  antenna

AeroAntenna AT2775-225

L1/L2 GPS Antenna

Trimble LV59

The Trimble LV59 Aviation GNSS Antenna has been designed to support centimeter level accuracy on land and marine applications. The rugged 5/8″ x 11 female threaded mount and all aluminum base allows the antenna to be used in the most rugged of environments.

Comprehensive GNSS support, including GPS Modernization signals, GLONASS, and Galileo

Trimble AG25

The Trimble® AG25 Antenna is a general purpose GNSS rover antenna ideal for dynamic applications where position and heading are required. The GA810 offers excellent OmniSTAR (L-Band), GPS and GLONASS signal reception, making it ideal for use with the OmniSTAR G2 service as well as GPS/GLONASS positioning and heading applications.

Optimized for dynamic applications that require both position and heading

Recommended for best OmniSTAR reception

Comprehensive GNSS support, including GPS Modernized signals,

Robust low-elevation satellite tracking

Magnetic mounting system GLONASS, and Galileo

Trimble GA810

The Trimble® GA810 Antenna is a general purpose GNSS rover antenna ideal for dynamic applications where position and heading are required. The GA810 offers excellent OmniSTAR (L-Band), GPS and GLONASS signal reception, making it ideal for use with the OmniSTAR G2 service as well as GPS/GLONASS positioning and heading applications.

Optimized for dynamic applications that require both position and heading

Recommended for best OmniSTAR reception

Comprehensive GNSS support, including GPS Modernized signals,

Robust low-elevation satellite tracking GLONASS, and Galileo

TRIMBLE Zephyr Model 2 Antennas

The range Trimble Zephyr™ external GNSS antenna contains advanced technology for multipath reduction, outstanding low elevation satellite tracking, and sub-millimeter phase center stability. The Trimble Zephyr 2, Zephyr 2 Rugged, and Zephyr 2 Geodetic antennas offer full support for current and near-future GNSS signals in combination with the rugged durability of each antenna.

Comprehensive GNSS support, including GPS Modernization signals,

Robust low-elevation satellite tracking

Minimized multipath

Sub-millimeter phase center repeatability

Ideal for fixed reference stations and GNSS infrastructure networks GLONASS, BeiDou and Galileo

Protempis Bullet L1/L2

The Protempis® Bullet DB GPS L1/L2 antenna is designed specifically to address the need of “critical infrastructure sectors” of the economy. GNSS timing application will benefit from increased signal availability, L1/L2 redundancy and elimination of atmospheric effects using dual frequencies techniques.

The weatherproof housing is designed to withstand continuous exposure to shock, excessive vibration, extreme temperatures, water and sunlight. For added reliability, the antenna cable can be threaded through a pole mount to keep it safe from environmental damage.

Key Features:

Dual Band (GPS L1 & L2)

Weatherproof housing

Well suited for critical infrastructure sectors

Frequency redundancy for harsh RF environments

Proven extra rugged, reliable

Available in 3.3v (TNC) or 5v (TNC or F)

RoHS II Compliant