GPS Aviation Antennas – GNSS

AeroAntenna and Trimble GNSS aviation antennas conform to strict standards of consistency and performance to deliver the best possible tracking to support high level accuracy in a compact and reliable form factor.

Unique antenna designs provide the flexibility to reach a wide range of operational goals. The antennas resist unwanted signal interference or multipath, which can cause inaccurate measurements. They are designed to be used in the most rugged of environments. The aviation antennas are designed to receive all existing and proposed public GNSS signals, including GPS, GLONASS, Galileo and Compass.

 

Quotation Request

2-3-4-1--AT1675-00

AeroAntenna AT1675-00

The AeroAntenna AT1675-0 is a high performance GPS L1 and GLONASS antenna with an ARINC 743 footprint which can be installed on all turbine, turboprop, and piston airframes. The AT1675-0 is FAA approved under TSO C-144 for use with GPS receivers capable of receiving L1 and GLONASS signals.

2-3-4-2--AT1675-80

AeroAntenna AT1675-80

The AeroAntenna AT1675-80 is an FAA TSO C-132 approved L, L1, L2 GPS and G1, G2 GLONASS antenna for installation on certified aircraft. Primarily used for photogrammetric and aerial survey applications. The AT1675-17 is a similar high performance antenna.

2-3-4-3--AT1675-81

AeroAntenna AT1675-81

The AeroAntenna AT1675-81 is AMSS/GPS ANTENNA, TSO

2-3-4-4--AT1675-381

AeroAntenna AT1675-381

The AeroAntenna AT1675-381 GPS(L1/L2),Glonass (G1/G2), L5 (Galileo, E1, E5a, E5b)

2-3-4-6--AT1675-17

AeroAntenna AT1675-17

The AeroAntenna AT1675-17 is a high performance GPS L1/L2 and GLONASS antenna with an ARINC 743 footprint which can be installed on all turbine, turboprop, and piston airframes. The AT1675-17 is FAA approved under TSO C-144 for use with GPS receivers capable of receiving L1, L2 and GLONASS signals.

2-3-4-7--AT1675-0

AeroAntenna AT1675-0

The AeroAntenna AT1675-0 is a high performance GPS L1 and GLONASS antenna with an ARINC 743 footprint which can be installed on all turbine, turboprop, and piston airframes. The AT1675-0 is FAA approved under TSO C-144 for use with GPS receivers capable of receiving L1 and GLONASS signals.

2-3-4-8-AV33

Trimble AV33 GNSS Antenna

The Trimble AV33 GNSS Antenna has been designed to support high accuracy aerial, land and marine applications in one small, compact design. The rugged 4-hole bulkhead mounting allows the antenna to be used in the most rugged of environments.

Support for GPS L1, GLONASS L1, Galileo

E1 and Compass B1

2-3-4-9-AV34

Trimble AV34 GNSS Antenna

The Trimble AV34 GNSS Antenna has been designed to support high accuracy aerial, land and marine applications in one small, compact design. The Trimble AV34 GNSS antenna offers support for both GPS and GLONASS L1/L2 signals.

Support for GPS L1, GLONASS L1, GPS_L2, and GLONASS L2

2-2-5-3-AV37

Trimble AV37 GNSS Antenna

The Trimble AV37 GNSS antenna conforms to strict standards of consistency and performance to deliver the best possible tracking to support centimeter level accuracy on aerial, land and marine applications. Unique antenna designs provide the flexibility to reach a wide range of operational goals.

Full support for L1/L2 GPS + GLONASS and L-Band signals

3-1-1-13-AV39

Trimble AV39

The Trimble AV39 GNSS Antenna has been designed to support centimeter level accuracy for airborne and ground vehicle applications and in one compact design. It is fully certified by the FAA for aircraft installations.

Key Features:

Full support for L1/L2/L5, G1/G2 GLONASS, E1/E5 Galileo, and B1/B2 BeiDou Support for L-Band/OmniStar/RTX

2-3-4-11-AV59

Trimble AV59 GNSS Antenna

The Trimble AV59 Aviation GNSS Antenna has been designed to support centimeter level accuracy on aerial, land and marine applications. The rugged 8-hole bulkhead mounting allows the antenna to be used in the most rugged of environments.

Comprehensive GNSS support, including GPS Modernization signals, GLONASS, and Galileo